Outokumpu 1.4510
Type 17Cr-Ti stainless steel: EN 1.4510, AISI 439
Applications
- Automotive exhaust system parts: mufflers, pipes, catalytic converters, support parts.
- Domestic appliance internal parts
Welding
- Conventional welding methods are applicable, austenitic 308L and ferritic 430LNb or 439 filler metals can be used.
- Austenitic filler metal will result in more a ductile weld.
- Ferritic filler metals are recommended to use in sulphuric environments and under thermal stresses.
- Shielding gases should be based on Ar/He, mixed with maximum of 2 % oxygen or carbon dioxide to improve the arc stability. Hydrogen and nitrogen additions are forbidden.
- Heat input should be minimized to reduce the grain coarsening effect in the heat-affected zone.
- Titanium stabilization prevents sensitization effect in the heat-affected zone.
- Adequate corrosion resistance in the welded joint is achieved using either mechanical descaling or pickling.
Fabrication
- Grade 1.4510 can be formed using typical forming processes like folding, bending, drawing, etc.
- It has higher minimum proof strength than standard austenitic stainless steel grade 1.4301 / AISI 304 in combination with lower work hardening behavior.
- Due to the stabilization, the r-value is higher compared to the non-stabilized ferritic stainless steel such as 1.4016.
- These characteristics mean excellent deep-drawability and other forming related properties.
Corrosion resistance
- Outokumpu produces grade 1.4510 with a typical chromium content of 17 wt-%.
- Titanium alloying reduces sensitivity for intergranular corrosion.
- Oxidation resistance is good up to 950°C.
- Relatively high chromium content improves resistance to crevice corrosion
- Grade 1.4510 is not susceptible to chloride induced stress corrosion cracking.
- The best material performance is reached usually with the help of adequate design and regular cleaning during use (if applicable)
一般属性
使用 Prospector 建立免費帳戶時,可造訪 Outokumpu 1.4510 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for Outokumpu as well as general information for the Steel - Wrought - Stainless - Ferritic generic family. 注册 或 登录 了解更多信息。