Hogen HM1000 (Chatter Free™)
Hogen Industries, Inc. established the standard for Chatter Free™ machining and grinding. It is used for end mill extensions, arbors, tool holders, grinding quills, and boring bars. When using Chatter Free material, you can make heavier cuts at increased speeds. Longer tool extensions are possible with ratios of up to 9:1, depending on the diameter.
Because of the very minimal chatter and high thermal conductivity—three times that of steel!—tools run cooler, adding to tool life and less down time.
Using Chatter Free material results in a better finish and added tool life in high RPM machining, when diamond or ceramic inserts are used. Because of its very high density, it has a rotating inertia effect in grinding and milling operations, which results in more accurate finishing.
Chatter Free material does not anneal during brazing, so carbide or tool holders and extensions can be brazed directly without affecting physical properties.
Chatter Free material is often used in place of tungsten carbide boring bars because:
- It has a higher density
- It's readily machinable
- It's less prone to chipping and breakage
- Both material and finishing costs are less
Chatter Free is relatively non-corrosive, and plating is normally not required in tooling applications. However, if plating is necessary, standard plating procedures for nickel and chromium plating are used. A copper flash is sometimes required for better adherence.
一般属性
使用 Prospector 建立免費帳戶時,可造訪 Hogen HM1000 (Chatter Free™) 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
加工
Find specific processing information for Hogen as well as general information for the Tungsten - Powder Metal - Alloy generic family. 注册 或 登录 了解更多信息。
购买地点
您可以從 1 個經銷商或製造商處購買 Hogen HM1000 (Chatter Free™)。 注册 或 登录 了解更多信息。