ASSAB 88
ASSAB 88 is a chromium-molybdenum-vanadium alloyed tool steel which is characterised by:
- Good wear resistance
- Good chipping resistance
- High compressive strength
- High hardness (>60 HRC) after high temperature tempering
- Good through-hardening properties
- Good dimensional stability during hardening
- Good resistance to tempering back
- Good WEDM properties
- Good machinability and grindability
- Amenable to surface treatment
Applications
ASSAB 88 is a general purpose steel for cold work tooling. It has a mixed-abrasive wear profile and a good resistance to chipping. Furthermore a high hardness (>60 HRC) can be obtained after high temperature tempering. This means that surface treatments such as nitriding or PVD can be made on a high strength substrate. Also, it means that complicated shapes with hardness levels >60 HRC can be wire EDM'd from blocks with relatively thick cross-sections with a much reduced risk of cracking.
ASSAB 88 is recommended for medium run tooling applications where a resistance to mixed or abrasive wear and a good resistance to chipping are required.
Typical Applications
- Blanking and fine blanking
- Shearing
- Forming
- Coining
- Cold forging
- Cold extrusion
- Thread rolling
- Drawing and deep drawing
- Powder pressing
一般属性
使用 Prospector 建立免費帳戶時,可造訪 ASSAB 88 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for ASSAB as well as general information for the Steel - Wrought - Tool Steel generic family. 注册 或 登录 了解更多信息。