HARRIS® GAL-VIV
PROCEDURE:
Remove all rust, slag and other foreign material from the area to be galvanized. No flux is needed for this process. The base metal must be heated to approximately 600°F (315°C). Rub the rod on the area to be coated, letting the heat from the base metal melt the rod. Do not apply torch directly onto the Gal-viz. Thinning action can be improved by brushing through the molten deposit using a clean wire brush. The alloy can be smoothed out with a paddle or cloth; DO NOT OVERHEAT! This product is intended to be used in the flat position, vertical is not recommended and overhead should never be performed.
Propriétés générales
Consultez la fiche technique complète de HARRIS® GAL-VIV en créant gratuitement votre compte Prospector. Vous y trouverez des informations exhaustives sur les propriétés physiques et mécaniques et sur la dureté
Technical Datasheet (English)
Télécharger le documentTraitement en cours
Find specific processing information for HARRIS® as well as general information for the Lead - Wrought - Alloy generic family. S’inscrire ou Connexion pour en savoir plus.
Où acheter
Vous pouvez acheter HARRIS® GAL-VIV auprès de 1 distributeurs ou fabricants. S’inscrire ou Connexion pour en savoir plus.
PROSPECTOR
Trouvez des solutions, pas seulement des matériaux..
Avec Prospector, vous disposez d’outils et de fonctions dynamiques qui vous permettront de trouver des solutions au plus vite.
S’inscrire aujourd’hui