Galvatite DX56D+ZF Fiche technique

Wrought Low Carbon Steel

Fourni par TATA STEEL

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Créez un compte gratuitement
Description du produit
Galvatite has a corrosion-resistant coating that remains firmly attached to the steel under the most severe forming operations. It continues to give general and sacrificial protection to all areas after forming and fabrication. Other important advantages are shown opposite.

  • A range of surface finishes, including those for high-class paint requirements.
  • Close control of coating mass and alloy phase composition of the iron- zinc coatings minimises the risk of powdering during press forming.
  • Galvatite steel grades with forming potential similar to uncoated cold-reduced products.
  • The Galvatite range includes highly formable high-strength steels with minimum tensile strengths up to 460N/mm².
  • A range of weldable products.
  • Galvatite products supplied oiled and unpassivated are compatible with many of the phosphate and other pre-treatment processes in current use.
  • Passivated Galvatite products can be painted to give enhanced corrosion resistance in severe environments.
  • The presence of Galvatite under a paint film greatly improves the overall corrosion resistance of the finished product. It also reduces the incidence of under-film ‘creep' and scabbing.

Coatings
Galvatite is available as ‘Galvatite Z', which has a pure zinc coating, or as ‘Galvatite ZF', which has an iron-zinc alloy coating. Galvatite ZF is ‘Galvanneal' and contains typically 8-12% iron in its coating. In this catalogue, references to Galvatite without the suffix Z or ZF refer to both the pure zinc and the iron-zinc alloy products.

Typical applications
  • Building and construction components
  • Steel framing
  • Automotive components and body panels
  • Tubes and sections
  • Racking and shelving
  • Domestic appliances and electrical goods
  • Components for agricultural machinery
Généralités  
État du matériau 
  • Commercial : actif
Disponibilité 
  • Afrique & Moyen-Orient
  • Amérique du Nord
  • Asie Pacifique
  • Europe
 
Available Documents
Technical Datasheet (English)
Metals General
Valeur nominale
Unité
 
Applicable Specifications
 
 
Forms Available
 
 
Metal Type
 
 
Metals Type Analysis
Valeur nominale
Unité
 
Type Analysis
     
Aluminum
%
 
Carbon
%
 
Manganese
%
 
Nitrogen
%
 
Phosphorus
%
 
Sulfur
%
 
Titanium
%
 
Metals Mechanical
Valeur nominale
Unité
 
Tensile Strength (Ultimate)
ksi
 
Tensile Strength (Yield), 0.2%
ksi
 
Tensile Elongation (Break)
%
 
Remarques
1Propriétés typiques : elles ne doivent pas être interprétées comme des spécifications.
 
UL et le logo UL sont des marques déposées de UL LLC © 2021. Tous droits réservés.
Les informations présentées sur cette fiche technique ont été obtenues par UL Prospector du producteur du matériau. UL Prospector met tout en œuvre pour garantir l’exactitude de ces données. Cependant, UL Prospector décline toute responsabilité pour les valeurs des données et recommande fortement de valider les différentes données auprès du fournisseur de matériau lors de la sélection finale du matériau.