Prospector
  • Accueil
  • Moly Ferritic Stainless Steel U-434

Moly Ferritic Stainless Steel U-434

Famille générique : Steel - Wrought - Stainless - FerriticDocuments mis à disposition par : Columbus Stainless (Pty) Ltd
Moly ferritic stainless steels are chromium stainless steels alloyed with Molybdenum, and can be stabilised with niobium and/or titanium.

Annealed moly ferritics are ductile and can be formed using a large variety of roll forming or mild stretch bending operations as well as the more common drawing and bending operations. They do not harden excessively during cold working.

Being ferritic, they are not susceptible to stress corrosion cracking.

The steels have limited weldability and should not be used in the as-welded condition for dynamic or impact loaded structures. Moly ferritics can undergo grain growth in the heat affected zone of weldments, which may adversely affect the mechanical properties in these zones.

Applications involving welded moly ferritics are thus generally limited to a maximum thickness of 2.5mm. Edge welds are not recommended for applications using moly ferritics.

They are unsuited for use in cryogenic applications as brittle fracture could occur at sub-zero temperatures.

U-434 is a low carbon, molybdenum containing ferritic stainless steel. With 16% chromium and 1% molybdenum, the steel has better corrosion resistance than U-430. U-434 has excellent polishing characteristics and is therefore used in applications such as automotive trim.

U-434 also has good formability and corrosion resistance and this makes it suitable for applications such as dishwashers, kitchen-ware and restaurant equipment, architectural applications (except in coastal environments), nitric acid plant equipment, etc.

U-436 is a low carbon, niobium stabilised, molybdenum containing ferritic stainless steel. With 16% chromium and 1% molybdenum, the steel has better corrosion resistance than U-1.4509.

Niobium stabilisation improves the steel's resistance to sensitisation in the weld heat affected zone and improves the steel's creep resistance at high temperatures. U-436 has similar formability to U-1.4509 and is used in applications such as automotive exhaust systems and trim, cladding, domestic appliances, etc.

U-444 is a low carbon, dual stabilised, molybde - num containing ferritic stainless steel. With 18% chromium and 2% molybdenum, the steel has good pitting resistance and crevice corro - sion resistance, similar to U-316L.

U-444 is thus suitable for roofing and cladding in marine environments, as well as hot water tanks and geysers, heat exchanger tubing and food processing equipment.
Propriétés générales

Consultez la fiche technique complète de Moly Ferritic Stainless Steel U-434 en créant gratuitement votre compte Prospector. Vous y trouverez des informations exhaustives sur les propriétés physiques et mécaniques et sur la dureté

État du matériau
Commercial : actif
Documents
description

Technical Datasheet (English)

Télécharger le document
Disponibilité
Afrique & Moyen-Orient
Autres propriétés
Applicable Specifications, Metal Type, Alloy Identification, Type Analysis, Densidad, Tensile Strength (Ultimate), Tensile Strength (Yield), 0.2%, Tensile Elongation (Break), Módulo de tensión, Mean Specific Heat, Mean CTE, Conductividad térmica, Electrical Resistivity
Access 13 properties in Metals. Create your free account or sign into Prospector.
Traitement en cours

Find specific processing information for Moly Ferritic Stainless Steel as well as general information for the Steel - Wrought - Stainless - Ferritic generic family. S’inscrire ou Connexion pour en savoir plus.

Où acheter

Vous pouvez acheter Moly Ferritic Stainless Steel U-434 auprès de 1 distributeurs ou fabricants. S’inscrire ou Connexion pour en savoir plus.

Se connecter/S’inscrire à Prospector
Fonctions Premium

PROSPECTOR

Trouvez des solutions, pas seulement des matériaux..

Avec Prospector, vous disposez d’outils et de fonctions dynamiques qui vous permettront de trouver des solutions au plus vite.

S’inscrire aujourd’hui