Galvatite DX56D+ZF Boletín técnico

Wrought Low Carbon Steel

Suministrado por TATA STEEL

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Cree su cuenta gratuita
Descripción del Producto
Galvatite has a corrosion-resistant coating that remains firmly attached to the steel under the most severe forming operations. It continues to give general and sacrificial protection to all areas after forming and fabrication. Other important advantages are shown opposite.

  • A range of surface finishes, including those for high-class paint requirements.
  • Close control of coating mass and alloy phase composition of the iron- zinc coatings minimises the risk of powdering during press forming.
  • Galvatite steel grades with forming potential similar to uncoated cold-reduced products.
  • The Galvatite range includes highly formable high-strength steels with minimum tensile strengths up to 460N/mm².
  • A range of weldable products.
  • Galvatite products supplied oiled and unpassivated are compatible with many of the phosphate and other pre-treatment processes in current use.
  • Passivated Galvatite products can be painted to give enhanced corrosion resistance in severe environments.
  • The presence of Galvatite under a paint film greatly improves the overall corrosion resistance of the finished product. It also reduces the incidence of under-film ‘creep' and scabbing.

Galvatite is available as ‘Galvatite Z', which has a pure zinc coating, or as ‘Galvatite ZF', which has an iron-zinc alloy coating. Galvatite ZF is ‘Galvanneal' and contains typically 8-12% iron in its coating. In this catalogue, references to Galvatite without the suffix Z or ZF refer to both the pure zinc and the iron-zinc alloy products.

Typical applications
  • Building and construction components
  • Steel framing
  • Automotive components and body panels
  • Tubes and sections
  • Racking and shelving
  • Domestic appliances and electrical goods
  • Components for agricultural machinery
Estado del Material 
  • Comercial: Activo
  • África y Oriente Medio
  • Asia-Pacífico
  • Europa
  • Norteamérica
Available Documents
Technical Datasheet (English)
Metals General
Valor Típico
Applicable Specifications
Forms Available
Metal Type
Metals Type Analysis
Valor Típico
Type Analysis
Metals Mechanical
Valor Típico
Tensile Strength (Ultimate)
Tensile Strength (Yield), 0.2%
Tensile Elongation (Break)
1Propiedades típicas: éstas no deben interpretarse como especificaciones.
UL y el logo de UL son marcas comerciales de UL LLC © 2021. Todos los derechos reservados.
La información presentada en este boletín técnico ha sido adquirida por UL Prospector del productor del material. UL Prospector realiza considerables esfuerzos para garantizar la exactitud de estos datos. No obstante, UL Prospector no asume responsabilidad alguna por los valores de los datos y recomienda encarecidamente que los datos del material se confirmen con el proveedor antes de la selección final.