Nicrofer® 3220 HP - alloy 800 HP
A special solution anneal treatment (with grain sizes = 90 µm/ASTM No. 4) gives highest creep-rupture strength above 700 °C (1290 °F) due to the precipitation of TiC.
Below 700 °C (1290 °F), gamma prime (?´) precipitates combined with loss of ductility.
Nicrofer 3220 HP is characterized by:
- excellent creep strength at temperature above 700 °C (1290 °F) However, for applications where frequent excursions to temperatures lower than 700 °C (1290 °F) during service cannot be excluded or parts of the material are permanently exposed to a temperature below 700 °C (1290 °F), the use of Nicrofer 3220 H is recommended.
- good resistance to reducing, oxidizing and nitriding atmospheres and to atmospheres which alternate between reducing and oxidizing conditions
- metallurgical stability in long-term application at high temperatures
Allgemeine Eigenschaften
Richten Sie ein kostenloses Prospector-Konto ein, um Zugang zu sämtlichen Angaben des Produktdatenblatts von Nicrofer® 3220 HP - alloy 800 HP zu erhalten. Dort finden Sie alle Angaben zu den physikalischen, mechanischen und Härteeigenschaften
Technical Datasheet (English)
Dokument herunterladenVerarbeitung
Finden Sie bestimmte Informationen zur Verarbeitung für Nicrofer® sowie allgemeine Informationen zum allgemeinen Produktkreis Nickel - Wrought - Ni-Fe-Cr Alloy. Registrieren oder Anmelden um mehr Informationen erhalten.
Bezugsquellen
Sie können Nicrofer® 3220 HP - alloy 800 HP von 1 Händler(n) oder Hersteller(n) kaufen. Registrieren oder Anmelden um mehr Informationen erhalten.
PROSPECTOR
Finden Sie Lösungen, nicht nur Materialien.
Wenn Sie sich bei Prospector registrieren, können Sie unsere dynamischen Werkzeuge und Funktionen nutzen, um schnell Lösungen zu finden.
Noch heute registrieren