ATI Steel Grain-Oriented Electrical Steel (Grade M-2) Datenblatt

Wrought Low Alloy Steel

Geliefert von Allegheny Technologies Incorporated

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Erstellen Sie Ihr kostenloses Konto
Produktbeschreibung
Nominal thickness: 0.007in (0.18mm)

ATI Allegheny Ludlum Grain-Oriented Electrical Steel (GOES) is processed under carefully controlled conditions to develop optimum magnetic characteristics in the rolling direction. GOES develops low core losses at high inductions when used as core material in designs with the flux path parallel to the rolling direction. These low losses at high inductions are attained with low exciting currents because of the excellent high induction permeability of GOES. In addition, the normal operating inductions for GOES are sufficiently below the magnetic saturation of the material to allow a comfortable margin of safety in most designs. Processing of GOES is carefully controlled in order to achieve a very high stacking factor for the core material. This stacking factor often exceeds 95 percent of the theoretical maximum. The high usable magnetic induction of GOES, along with the high stacking factor, allow compact core designs requiring the minimum amount of material to be used in the windings surrounding the core. This contributes to low losses, not only in the core (no load losses), but also allows for minimum load losses or winding losses in the transformer.

ATI Allegheny Ludlum GOES also offers low manufacturing costs for transformer cores. GOES may be processed into conventional core designs and is available in a wide variety of widths ranging from 3 inches to 34 inches (7.6 cm to 86.4 cm). GOES can be formed by conventional methods. Slitting, cutting to length, winding, and stacking may all be accomplished using conventional core processing. Stress relief annealing, where required, can also be accomplished using conventional techniques.
Allgemein  
Materialstatus 
  • Kommerziell: Aktiv
Verfügbarkeit 
  • Afrika und Mittlerer Osten
  • Asien Pazifik
  • Europa
  • Lateinamerika
  • Nordamerika
Available Documents
Technical Datasheet (English)
Metals General
Nominalwert
Einheit
 
Applicable Specifications
 
 
Forms Available
 
 
Metal Type
 
 
Metals Physical
Nominalwert
Einheit
 
Dichte
lb/in³
 
Metals Mechanical
Nominalwert
Einheit
 
Tensile Strength (Ultimate) 2
ksi
 
Tensile Strength (Yield), 0.2% 2
ksi
 
Tensile Elongation (Break) 2
%
 
Härte Eigenschaften 2 (HR-15T-Scale)
 
 
Zug-Modul 2
ksi
 
Metals Thermal
Nominalwert
Einheit
 
Mean Specific Heat
Btu/lb/°F
 
Mean CTE (68 bis 212°F)
in/in/°F
 
Wärmeleitfähigkeit (68 bis 1112°F)
Btu·in/hr/ft²/°F
 
Metals Electrical
Nominalwert
Einheit
 
Electrical Resistivity (68°F)
ohms·cir·mil/ft
 
Anmerkungen
1Typische Eigenschaften, nicht als Spezifikationen anzusehen
2Angle to Rolling Direction: 0°
 
UL und das UL-Logo sind Handelsmarken von UL LLC © 2022 Alle Rechte vorbehalten.
Die in diesem Datenblatt enthaltenen Informationen wurden von UL Prospector auf der Grundlage der Angaben des Herstellers des Materials zusammengestellt. UL Prospector setzt sich dafür ein, die Genauigkeit der Daten zu gewährleisten. UL Prospector haftet jedoch in keinem Fall für die Daten/Werte und empfiehlt dringend, sich diese bei der endgültigen Auswahl des Materials vom Hersteller bestätigen zu lassen.