Aperam AISI 310S Datasheet

Wrought Stainless Steel

Supplied by Aperam

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
The austenitic stainless steel 310S (UNS S31008/AISI310S) has about 25% Cr, 0,6 % Si and 20% Ni. This grade is known for its behavior of corrosion resistance at high temperature. The additions of carbon are optimized in order to improve its creep deformation resistance. The steel can easily be welded. AISI 310S is projected for high temperature applications, up to 1100°C, in oxidating atmospheres.

The steel can also be used under conditions of slightly oxidating atmosphere, nitriding, cementation and sulfuring as well as with thermal cycles, although temperature must be reduced.

This stainless steel is widely used in the thermal treatment industry for parts of furnaces, such as refractories support, parts of burners, conveyor belts, furnace lining, fans, etc.; in the food industry, they are used in contact with heated citric and acetic acids.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Available Documents
Technical Datasheet (English)
Metals General
Nominal Value
Unit
 
Forms Available
 
 
Metal Type
 
 
Alloy Identification
 
 
Metals Type Analysis
Nominal Value
Unit
 
Type Analysis
     
Carbon
%
 
Chromium
%
 
Iron (Balance)
%
 
Manganese
%
 
Nickel
%
 
Phosphorus
%
 
Silicon
%
 
Sulfur
%
 
Metals Physical
Nominal Value
Unit
 
Density
lb/in³
 
Metals Mechanical
Nominal Value
Unit
 
Tensile Strength (Ultimate)
ksi
 
Tensile Strength (Yield), 0.2%
ksi
 
Tensile Elongation (Break)
%
 
Hardness (HRB-Scale)
 
 
Tensile Modulus
ksi
 
Metals Thermal
Nominal Value
Unit
 
Mean CTE
     
68 to 212°F
in/in/°F
 
68 to 932°F
in/in/°F
 
68 to 1832°F
in/in/°F
 
Thermal Conductivity (212°F)
Btu·in/hr/ft²/°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.