Arcam Grade 2 Titanium Datasheet

Powder Titanium

Supplied by Arcam AB

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Special Characteristics
Unalloyed Commercially Pure (CP) Titanium is available in four different grades, 1, 2, 3 and 4, which are used based on the corrosion resistance, ductility and strength requirements of the specific application. Grade 1 has the highest formability, while Grade 4 has the highest strength and moderate formability.

CP Titanium users utilize its excellent corrosion resistance, formability and weldable characteristics in many critical applications.

Titanium Grade 2 is stronger than Grade 1 and equally corrosion-resistant against most applications.

Titanium Grade 2 has numerous applications in the medical industry. Biocompatibility of Titanium Grade 2 is excellent, especially when direct contact with tissue or bone is required.

Applications
Titanium Grade 2 is typically used for:
  • Orthopaedic applications, such as implants and prosthesis
  • Airframe and aircraft engine parts
  • Marine chemical parts
  • Condenser tubing
  • Heat exchangers

Powder specification
The Arcam Titanium Grade 2 powder has a particle size between 45 and 100 microns. This limit on the minimum particle size ensures safe handling of the powder.

General Characteristics
The high strength, low weight ratio and outstanding corrosion resistance inherent to titanium and its alloys has led to a wide and diversified range of successful applications which demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries.

In the majority of these and other engineering applications titanium has replaced heavier, less serviceable or less cost- effective materials. Designing with titanium taking all factors into account has resulted in reliable, economic and more durable systems and components, which in many situations have substantially exceeded performance and service life expectations.

Titanium is available in different grades, unalloyed or alloyed.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Biocompatible
  • Corrosion Resistant
  • High Strength
Uses 
  • Additive Manufacturing (3D Printing)
  • Aerospace Applications
  • Automotive Applications
  • Marine Applications
  • Medical Devices
  • Medical/Healthcare Applications
  • Prototyping
Forms 
  • Powder
Processing Method 
  • 3D Printing, Electron Beam
Features
Features may also be described by the following terms: High Strength, Good Corrosion Resistance, Corrosion Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Medical Appliances, Medical Devices, Medical Applications, Additive Manufacturing, 3D Printing,3-D Printing.
Available Documents
Technical Datasheet (English)
Metals General
Nominal Value
Unit
 
Forms Available
 
 
Metal Type
 
 
Metals Type Analysis
Nominal Value
Unit
 
Type Analysis
     
Carbon
%
 
Hydrogen
%
 
Iron
%
 
Nitrogen
%
 
Oxygen
%
 
Titanium (Balance)
%
 
Metals Mechanical
Nominal Value
Unit
 
Tensile Strength (Ultimate)
ksi
 
Tensile Strength (Yield), 0.2%
ksi
 
Tensile Elongation (Break)
%
 
Reduction of Area
%
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.