Designed for repair and fabrication applications on steel, copper, copper alloys nickel and nickel alloys

RECOMMENDED PROCEDURE:
Clean all areas to be joined or built-up thoroughly apply the Harris 600 bronze brazing flux then using a neutral flame, heat the part until the flux liquefies. The flux can also be applied directly to the rod, by heating the rod and dipping the rod into the powder flux. Add a drop of the alloy and flow it out using the torch flame. There is no need to remove the flux between passes. The torch should be held at a low angle to prevent excessive heat build-up in the part. When working on cast iron, bonding qualities can be improved by first searing the surface with a strong oxidizing flame.

AVAILABLE FORMS:
Standard wire diameters, performed rings, Flux coated rods.