TIMETAL® 75A Datasheet

Wrought Titanium

Supplied by TIMET®

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
TIMETAL 75A is equivalent to ASTM Grade 4. It has the highest str ength of the four ASTM commercially pure titanium grades in addition to good ductility and moderate formability. The benefits of the good strength to weight ratio of TIMETAL 75A are retained at moderate temperatures. TIMETAL 75A is typically used in continuous service up to 800°F (425°C) and in intermittent service up to 1000°F (540°C). It also has good impact properties at low temperatures. In addition, TIMETAL 75A can be satisfactorily welded, machined, cold worked, hot worked, and cast.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Available Documents
Technical Datasheet (English)
Metals General
Nominal Value
Unit
 
Forms Available
 
 
Metal Type
 
 
Metals Type Analysis
Nominal Value
Unit
 
Type Analysis
     
Carbon
%
 
Hydrogen
%
 
Iron
%
 
Nitrogen
%
 
Other Elements
%
 
Oxygen
%
 
Titanium
%
 
Metals Physical
Nominal Value
Unit
 
Density
lb/in³
 
Metals Mechanical
Nominal Value
Unit
 
Tensile Strength (Ultimate)
ksi
 
Tensile Strength (Yield), 0.2%
ksi
 
Tensile Elongation (Break)
%
 
Reduction of Area
%
 
Tensile Modulus (68 to 78°F)
ksi
 
Metals Thermal
Nominal Value
Unit
 
Mean CTE (68 to 212°F)
in/in/°F
 
Thermal Conductivity
Btu·in/hr/ft²/°F
 
Metals Electrical
Nominal Value
Unit
 
Electrical Resistivity
ohms·cir·mil/ft
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL LLC ©2022. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.